Management of Bone Loss in Posterior Glenohumeral Shoulder Instability: Current Concepts.

¼ Posterior glenohumeral instability is relatively uncommon compared with anterior instability, but is becoming an increasingly recognized and surgically managed shoulder pathology.¼ Soft-tissue stabilization alone may not be sufficient in patients who present with substantial bone loss to the posterior glenoid and/or the anterior humeral head.¼ For posterior glenoid defects, posterior glenoid osteoarticular augmentation can be used, and posterior glenoid opening wedge osteotomy can be considered in cases of posterior instability with pathologic retroversion.¼ For humeral head lesions, several surgical treatment options are available including subscapularis transposition into the humeral head defect, autograft or allograft reconstruction, humeral rotation osteotomy, and shoulder arthroplasty.

The Global Track Concept for Assessment of Engaging Hill-Sachs Defects in Anterior Shoulder Instability.

BACKGROUND: The glenoid track concept is used to determine preoperatively whether a Hill-Sachs defect is engaging or not. Currently, the glenoid track concept relies on measurements of bony structures as well as on the confines and elasticity of the rotator cuff as a reference point, which varies extensively among individuals and therefore limits the reliability and accuracy of this concept. PURPOSE: To evaluate the reliability of the global track concept, which determines the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head as a new reference point with the help of an automated image analysis software and 3-dimensional analysis of the humeral head. STUDY DESIGN: Controlled laboratory study. METHODS: Computed tomography scans of 100 patients treated for anterior shoulder instability with different sizes of Hill-Sachs defects were evaluated manually by 2 orthopaedic surgeons independently using the software OsiriX as well as automatically by using a dedicated prototype software (ImFusion). Obtained manual and automated measurements included the Hill-Sachs length, Hill-Sachs width, and Hill-Sachs depth of the defect; the Hill-Sachs interval (HSI); and the glenoid width for the glenoid track concept, as well as the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head (global track concept). The reliability of the different measurement techniques was compared by calculating intraclass correlation coefficients (ICCs). RESULTS: There was a significant difference for all obtained parameters comparing manual and automatic measurements. For manually obtained parameters, measurements referring to bony boundaries (glenoid width, Hill-Sachs length, and Hill-Sachs width) showed good to excellent agreement (ICC, 0.86, 0.82, and 0.62, respectively), while measurements referring to soft tissue boundaries (HSI and glenoid track; ICC, 0.56 and 0.53, respectively) or not directly identifiable reference points (center of articular surface and global track) only showed fair reliability (ICC middle excursion, 0.42). When the same parameters were measured with the help of an automated software, good reliability for the glenoid track concept and excellent reliability for the global track concept in the middle excursion were achieved. CONCLUSION: The present study showed that the more complex global track measurements of humeral defects are more reliable than the current standard HSI and glenoid track measurements. However, this is only true when automated software is used to perform the measurements. CLINICAL RELEVANCE: Future studies using the new proposed method in combination with an automated software need to be conducted to determine critical threshold values for defects prone to engagement.

[Clinical effect of allogeneic peroneal bone marrow support combined with plate fixation for the treatment of Neer type â £ proximal humeral fractures].

OBJECTIVE: To explore clinical effect of allogeneic peroneal bone marrow support combined with plate internal fixation in treating Neer type Ⅳproximal humeral fractures. METHODS: From December 2017 to December 2020,12 patients with Neer type Ⅳ proximal humeral fractures were treated with allogeneic peroneal bone marrow support combined with plate internal fixation,including 7 males and 5 females,aged from 56 to 78 years old;the time from injury to operation ranged from 1 to7 days. Operative time,fracture healing time and complications during follow-up were observed,and clinical efficacy was evaluated by Constant-Murley score at the latest follow-up. RESULTS: All patients were obtained follow up for 20 to 29 months. All patients got bone healing and incisicons were healed at stageⅠ,operative time ranged from 95 to 138 min,blood loss ranged from 210 to 275 ml,fracture healing time ranged from 14 to 18 weeks. Two patients occurred postoperative shoulder stiffness and recovered after 2 weeks of passive exercise. There were no complications such as infection,poor wound healing,and failure (fracture and loosening) of internal fixators occurred. Constant-Murley shoulder function score ranged from 69 to 89 at the latest follow up,2 patients got excellent results,9 good and 1 fair. CONCLUSION: The application of allogeneic fibular bone marrow placement could provide effective support for medial humerus,which is conducive to assisting reduction of fracture end,reducing occurrence of internal fixation failure caused by collapse of humerus head and screw perforation,and significantly improving function of shoulder joint.

The morphometric parameters of the biceps brachii: cadaveric study.

BACKGROUND: The biceps brachii (BB) is a fusiform muscle comprising of two muscular bellies located in the anterior compartment of the arm. Its primary function includes elbow flexion and forearm supination. PURPOSE: The study aimed to examine the morphometric parameters of the BB in adult cadaveric specimens. METHODS: This dissection-based study examined the anatomy of the BB in 40 arms taken from 20 Thiel embalmed European cadavers, including 13 males with an average age of 81 years and seven females with an average age of 84 years. The investigation included an observational inspection of the BB morphology and collected 19 parameters, comprising the lengths and widths of the short and long head tendons and muscle bellies. RESULTS: The observation analysis showed that the anatomy of the BB consisted mainly of two muscle bellies: a short head and a long head. An additional third humeral head, originating from the anteromedial aspect of the mid of the humerus and inserted into the common biceps tendon, was observed in four (10%) specimens. The average lengths of the short head and long head were 35.98 ± 3.44 cm and 38.90 ± 3.40 cm, respectively. There was no difference in the BB parameters according to the arm sides. However, the male specimens showed greater BB parameters than the female specimens. CONCLUSION: The short head had a greater muscle belly, while the long head had a longer origin and insertion tendons. The BB parameters were correlated positively with the humerus length.

Assessing complications and functional outcomes in proximal humerus fracture management: a retrospective comparison between conservative and intramedullary nailing treatments.

INTRODUCTION: Fractures of the proximal end of the humerus (FPH) are the second most common fractures in the upper limb after fractures of the distal radius and are two to three times as common in women than in men. Therefore, the main objective of the present study was to compare and analyze the complications and the functional outcomes in patients with displaced FPH receiving conservative and surgical treatments with intramedullary nailing. METHODS: A retrospective cross-sectional study was conducted to establish the differences in complications risks between surgical and non-surgical treatment of the FPH. For this purpose, the clinical and radiological results of 67 consecutive patients were analyzed. RESULTS: A total of 25 patients were included in the non-surgically treated group. A total of 42 patients were included in the surgically treated group. Complications occurred in a total of 4 (16.0%) patients after the non-surgical treatment. Those included frozen shoulder (n = 2), nonunion (n = 1), and avascular necrosis of the humeral head (n = 1). Complications occurred in a total of 18 (42.6%) patients after the surgical treatment. Non-surgically treated patients had statistically significantly (p < 0.05) lower scores in the Constant-Murley scale in all of the categories. CONCLUSION: The present study demonstrates an overall prevalence of complications to be 16% in patients treated conservatively and 42.6% in patients treated surgically. In the non-surgical cohort, the frozen shoulder was the most frequently observed complication (8%). Interestingly, non-anatomical repositioning was the most prevalent complication in surgically treated patients. Due to the complexity of the FPH, we believe that the surgeon needs to have comprehensive knowledge regarding the characteristics of this fracture, the available treatment options, and the possible complications that may occur. This can enhance patient safety and provide satisfactory clinical outcomes.

Defining Critical Humeral Bone Loss: Inferior Craniocaudal Hill-Sachs Extension as Predictor of Recurrent Instability After Primary Arthroscopic Bankart Repair.

BACKGROUND: The glenoid track concept for shoulder instability primarily describes the medial-lateral relationship between a Hill-Sachs lesion and the glenoid. However, the Hill-Sachs position in the craniocaudal dimension has not been thoroughly studied. HYPOTHESIS: Hill-Sachs lesions with greater inferior extension are associated with increased risk of recurrent instability after primary arthroscopic Bankart repair. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: The authors performed a retrospective analysis of patients with on-track Hill-Sachs lesions who underwent primary arthroscopic Bankart repair (without remplissage) between 2007 and 2019 and had a minimum 2-year follow-up. Recurrent instability was defined as recurrent dislocation or subluxation after the index procedure. The craniocaudal position of the Hill-Sachs lesion was measured against the midhumeral axis on sagittal magnetic resonance imaging (MRI) using either a Hill-Sachs bisecting line through the humeral head center (sagittal midpoint angle [SMA], a measure of Hill-Sachs craniocaudal position) or a line tangent to the inferior Hill-Sachs edge (lower-edge angle [LEA], a measure of Hill-Sachs caudal extension). Univariate and multivariate regression were used to determine the predictive value of both SMA and LEA for recurrent instability. RESULTS: In total, 176 patients were included with a mean age of 20.6 years, mean follow-up of 5.9 years, and contact sport participation of 69.3%. Of these patients, 42 (23.9%) experienced recurrent instability (30 dislocations, 12 subluxations) at a mean time of 1.7 years after surgery. Recurrent instability was found to be significantly associated with LEA >90° (ie, Hill-Sachs lesions extending below the humeral head equator), with an OR of 3.29 (P = .022). SMA predicted recurrent instability to a lesser degree (OR, 2.22; P = .052). Post hoc evaluation demonstrated that LEA >90° predicted recurrent dislocations (subset of recurrent instability) with an OR of 4.80 (P = .003). LEA and SMA were found to be collinear with Hill-Sachs interval and distance to dislocation, suggesting that greater LEA and SMA proportionally reflect lesion severity in both the craniocaudal and medial-lateral dimensions. CONCLUSION: Inferior extension of an otherwise on-track Hill-Sachs lesion is a highly predictive risk factor for recurrent instability after primary arthroscopic Bankart repair. Evaluation of Hill-Sachs extension below the humeral equator (inferior equatorial extension) on sagittal MRI is a clinically facile screening tool for higher-risk lesions with subcritical glenoid bone loss. This threshold for critical humeral bone loss may inform surgical stratification for procedures such as remplissage or other approaches for at-risk on-track lesions.

A prognostic classification of proximal humerus fractures: the cephalic extension staging.

PURPOSE: Recent publications emphasized the role of dorsomedial metaphyseal extension of humeral head as predictor of ischemia after complex proximal humerus fractures (PHFs). We evaluated on preoperative 3D CT scan of PHFs the surface of this metaphyseal extension and its prognostic value on the occurrence of avascular necrosis (AVN). METHODS: We followed a series of 25 fixations of complex PHF which had a preoperative 3D CT scan and measured the surface area of the posterior metaphyseal extension (PME) of the head. Using approximations, we calculated the ratio between the PME surface area (PMS) and the articular surface area of the head (HS). The PMS/HS ratio was analyzed against the risk of AVN. RESULTS: The measurement of the PMS/HS ratio emphasizes the significance of PME. The incidence of AVN is correlated with the magnitude of PME. Therefore, we include the PME as a fifth element in the characterization of complex PHFs and we propose a 4-stage prognostic classification based on the number of extensions of the humeral head. The head may have 3 extensions: posteromedial (PME), lesser tuberosity (LTE) and greater tuberosity (GTE). The risk of AVN decreases with the number of extensions of the head. CONCLUSION: Our study demonstrates a correlation between the occurrence of AVN and the size of PME in complex PHF cases. We propose a four-stage classification system to facilitate treatment decision-making between fixation and prosthesis.

[Imaging of posttraumatic shoulder instability : Current concepts]. / Bildgebung bei posttraumatischen Instabilitäten der Schulter : Aktuelle Konzepte.

Posttraumatic instability accounts for more than 95% of all shoulder instabilities with the highest incidence in patients between 20 and 30 years of age. In this age group, lesions of the capsulolabral complex are the most common sequelae after the first shoulder dislocation. Typical acute findings are the Bankart and Perthes lesions and humeral avulsion of the glenohumeral ligament (HAGL). Chronic sequelae are anterior labroligamentous periosteal sleeve avulsion (ALPSA) lesions, and nonclassifiable lesions with deficient anterioinferior labrum and glenohumeral ligaments. Recently, quantification of Hill-Sachs and bony Bankart lesions with glenoid defects have become the focus of interest: bipolar bone loss has emerged to be one important factor of recurrent instability that has not been addressed during the first stabilizing operation. The glenoid track concept emphasizes the importance of bipolar bone loss, where the glenoid track refers to the contact area between the humeral head and the glenoid at the end-range of motion in abduction, extension and external rotation. Any lesion of the humeral head that extends beyond the glenoid track is considered high risk for engagement of the humeral head at the glenoid margin with subsequent dislocation. Both the Hill-Sachs interval and the glenoid track can be determined using computed tomography (CT) and magnetic resonance imaging and, thus, help to define the status of the shoulder (on-track vs. off-track), which is prerequisite for planning the appropriate operative procedure. Similar tendencies also exist for posttraumatic posterior instabilities which are much rarer.

The arthroscopic double-button Latarjet does not modify the static posterior translation of the humeral head.

INTRODUCTION: The Latarjet procedure treats anterior instability of the shoulder and is based on a triple anterior lock, where the conjoint tendon straps the lower third of the subscapularis muscle. Excessive posterior translation of the humeral head is a known risk factor for shoulder osteoarthritis. No in vivo study has investigated the effect of the bone block on the posterior static translation of the humeral epiphysis. The purpose of this study was to evaluate the effect of the bone block on the static posterior translation of the humeral head. The hypothesis was that this procedure increased this translation. MATERIALS AND METHODS: This retrospective study included patients treated arthroscopically for anterior shoulder instability by a double-button Latarjet. An independent examiner analyzed the CT scans preoperatively, at 15 days, and at least 6 months postoperatively according to a standardized protocol. The analysis focused on the position of the bone block in the axial and coronal planes relative to the glenoid. The posterior translation was automatically calculated using the Blueprint© planning software. RESULTS: Thirty-five patients were included with a mean age of 25 years (16-43), according to a 4M/1F sex ratio. The graft was perfectly flush to the subchondral bone in 63% (n=22) of cases and subequatorial in 91% (n=32). Preoperative posterior humeral translation was 52%. The mean immediate postoperative posterior humeral translation was 56%, and 57% at more than 6 months. The change in mean posterior humeral translation between preoperative/6 months was +0.94% [-20%; +12%] (p=0.29) and immediate postoperative/6 months +0.34% [-18%; +15%] (p=0.84). Gender, hypermobility and the axial position of the bone block did not influence the change in posterior humeral translation. The equatorial position of the bone block appeared to increase posterior humeral translation by +10%±5.2% [-0.427; 20.823] (p=0.07). CONCLUSION: This work refutes our initial hypothesis. The change in static posterior humeral translation after arthroscopic Latarjet bone block remains stable at more than 6 months of follow-up. This procedure does not alter the anatomical position of the humeral head in relation to the glenoid. On the other hand, a more cranial positioning of the bone block could have an influence. LEVEL OF EVIDENCE: IV.

Endosteal strut using a hydroxyapatite/poly-L-lactide mesh tube with a proximal humeral locking plate for the treatment of proximal humeral fractures.

PURPOSE: Proximal humeral fractures cause large intramedullary bone defects after humeral-head reduction. Hydroxyapatite/poly-L-lactide (HA/PLLA) materials are widely used for various fractures. However, the efficacy of endosteal strut using a HA/PLLA mesh tube (ES-HA/PLLA) with a locking plate for treating proximal humeral fractures was not reported. The purpose of this study is to examine the efficacy of ES-HA/PLLA with a proximal humeral locking plate in proximal humeral fractures. METHODS: Seventeen patients with proximal humeral fractures treated using ES-HA/PLLA with a locking plate from November 2017 to November 2021 were evaluated. The range of motion of the shoulder and postoperative complications were assessed at the final follow-up. Radiographs were evaluated to assess bone union and loss of reduction by measuring humeral-head height (HHH) and humeral neck-shaft angle (NSA). RESULTS: The average flexion and external rotation of the shoulder at the final follow-up were 137° (range, 90-180°) and 39° (range, - 10 to 60°), respectively. All fractures were united. The average HHH and NSA just after the surgery and final follow-up were 12.5 mm and 11.6 mm and 129.9° and 127.4°, respectively. Two patients presented screw perforation of the humeral head. One patient underwent implant removal due to infection. Avascular necrosis of the humeral head was observed in one patient with arthritis mutilans. CONCLUSIONS: The use of ES-HA/PLLA with a proximal humeral locking plate resulted in bone union in all patients and prevented postoperative loss of reduction. ES-HA/PLLA is one of the treatment options for proximal humeral fractures.

Superior humeral head osteophytes are associated with rotator cuff insufficiency in glenohumeral osteoarthritis: a retrospective analysis.

PURPOSE: The primary goal of this study was to investigate whether superior humeral head osteophyte (SHO) size is associated with rotator cuff insufficiency, including rotator cuff tear (RCT), supraspinatus tendon thickness, and fatty infiltration of the rotator cuff muscles. METHODS: Patients ≥ 18 years who were diagnosed with glenohumeral osteoarthritis were retrospectively reviewed. SHO size was determined by radiograph. MRI measured SHO and RCT presence, type, and size; supraspinatus tendon thickness; and fatty infiltration of rotator cuff musculature. RESULTS: A total of 461 patients were included. Mean SHO size was 1.93 mm on radiographs and 2.13 mm on MRI. Risk ratio for a RCT was 1.14. For each 1-mm increase in SHO size on radiograph, supraspinatus tendon thickness decreased by 0.20 mm. SHO presence was associated with moderate-to-severe fatty infiltration of the supraspinatus with a risk ratio of 3.16. CONCLUSION: SHOs were not associated with RCT but were associated with higher risk of supraspinatus FI and decreased tendon thickness, which could indicate rotator cuff insufficiency. LEVEL OF EVIDENCE: IV.

Biomechanics of subscapularis V-shaped tenotomy compared to standard tenotomy.

BACKGROUND: Subscapularis function is critical after anatomic total shoulder arthroplasty (aTSA). Recently, however, a technique has been described that features a chevron or V-shaped subscapularis tendon cut (VT). This biomechanical study compared repair of the standard tenotomy (ST), made perpendicular to the subscapularis fibers, to repair of the novel VT using cyclic displacement, creep, construct stiffness, and load to failure. METHODS: This biomechanical study used 6 pairs of fresh frozen paired cadaveric shoulder specimens. One specimen per each pair underwent VT, the other ST. Subscapularis tenotomy was performed 1 cm from the insertion onto the lesser tuberosity. For VT, the apex of the V was 3 cm from the lesser tuberosity. After tenotomy, each humerus underwent humeral head arthroplasty. Eight figure-of-8 sutures were used to repair the tenotomy (Ethibond Excel; Ethicon, US LLC). Specimens were cyclically loaded from 2 to 100 N at 45 degrees abduction at a rate of 1 Hz for 3000 cycles. Cyclic displacement, creep, and stiffness and load to failure were measured. RESULTS: Cyclic displacement did not differ significantly between the ST and VT from 1 to 3000 cycles. The difference in displacement between the V-shaped and standard tenotomy at 3000 cycles was 1.57 mm (3.66 ± 1.55 mm vs. 5.1 ± 2.8 mm, P = .31, respectively). At no point was the V-shape tenotomy (VT) >3 mm of average displacement, whereas the standard tenotomy (ST) averaged 3 mm of displacement after 3 cycles. Creep was significantly lower for VT in cycles 1 through 3. For all cycles, stiffness was not significantly different in the VT group compared with the ST group. Load to failure was not statistically significant in the VT compared to the standard tenotomy throughout all cycles (253.2 ± 27.7 N vs. 213.3 ± 76.04 N; P = .25, respectively). The range of load to failure varied from 100 to 301 N for standard tenotomy compared with 216 to 308 N for VT. CONCLUSION: This study showed that VT and ST demonstrated equivalent stiffness, displacement, and load to failure. VT had the benefit of less creep throughout the first 3 cycles, although there was no difference from cycle 4 to 3000. The VT had equivalent biomechanical properties to the ST at time zero, an important first step in our understanding of the technique. The VT technique warrants further clinical study to determine if the technique has clinical benefits over ST following aTSA.

Pyrocarbon humeral heads for hemishoulder arthroplasty grant satisfactory clinical scores with minimal glenoid erosion at 5-9 years of follow-up.

BACKGROUND: Hemishoulder arthroplasty (HSA) is a more conservative alternative to total shoulder arthroplasty for young and active patients with minimal glenoid erosion or deformity. Pyrocarbon humeral heads were introduced as an alternative to metallic humeral heads, which were associated with glenoid erosion in 28%-43%. The purpose of this study was to evaluate the progression of glenoid erosion and clinical scores of HSA using pyrocarbon humeral heads from short- (2-4 years) to midterm (5-9 years). METHODS: We retrieved the records of 45 consecutive patients who underwent HSA with pyrocarbon humeral heads from 2013 to 2017. Patients were evaluated radiographically and clinically at a first follow-up (2-4 years) and a second follow-up (5-9 years). Preoperative glenoid morphology was assessed using computed tomography scans, and glenoid erosion was assessed using plain radiographs according to Sperling et al. The Constant score (CS), American Shoulder and Elbow Surgeons (ASES) score, and Subjective Shoulder Value (SSV) score were assessed by an independent observer. RESULTS: From the initial cohort of 45 patients, 2 underwent revision surgery (4.4%) due to persistent pain (without signs of rotator cuff pathology or glenoid erosion) and 6 were lost to follow-up (13%), leaving 37 for outcome assessment (82%). At the first follow-up of 2.2 ± 0.4 years, all clinical scores improved substantially (CS from 29.3 ± 13.5 to 76.7 ± 14.4, ASES from 23.7 ± 15.6 to 87.0 ± 16.0, and SSV from 25.3 ± 12.2 to 84.1 ± 15.2), and at the second follow-up of 6.2 ± 1.2 years, good clinical scores were maintained (CS from 76.7 ± 14.4 to 80.8 ± 16.0, ASES from 87.0 ± 16.0 to 92.3 ± 15.0, and SSV from 84.1 ± 15.2 to 82.8 ± 18.3). At the second follow-up, glenoid erosion was moderate in 9 (24%) and severe in 3 (8.1%). When comparing with immediate postoperative radiographs, 10 shoulders exhibited progression of glenoid erosion by 1 grade (n = 9) or 2 grades (n = 1). CONCLUSION: Pyrocarbon humeral heads for HSA grant satisfactory clinical scores with minimal glenoid erosion.

Missed Osteochondral Shear Injury of the Humeral Head Following Anterior Shoulder Dislocation - A Case Report.

CASE: Two months after anterior shoulder dislocation and spontaneous reduction, a 41-year-old man presented movement-related shoulder pain and a functional deficit. An initially missed osteochondral shearing injury of the humeral head with a Bankart lesion was diagnosed. Due to an extensive posteroinferior defect, an open reduction and internal fixation (ORIF) using bioabsorbable chondral darts was performed. At the 1-year follow-up, magnetic resonance images showed a completely healed osteochondral fragment and the patient presented an unrestricted shoulder function. CONCLUSION: Even in missed osteochondral shear injuries, ORIF with bioabsorbable implants can be associated with an excellent functional outcome and sufficient integrity of the fragment. The absorbable implants are biocompatible, therefore the risk of revision surgery due to implant irritations is minimized.

Risk factors for osteonecrosis of the humeral head after internal fixation of proximal humeral fractures: a systematic review and meta-analysis.

BACKGROUND: Osteonecrosis of the humeral head (ONHH) is a severe complication after the internal fixation of proximal humeral fractures (IFPHF). The risk factors remain controversial though many studies have reported. In this research, meta-analysis was used to evaluate which surgeon-level factors can be modified to lower the risk and we hope to provide evidence-based support for preventing ONHH. METHODS: Literature was retrieved from PubMed, Cochrane Library, Embase, Web of Science, and Scopus for eligible studies published up to January 2023. The pooled odds ratios (ORs) were calculated with their corresponding 95% confidence intervals (CIs) to evaluate. STATA 15.1 software was applied for data synthesis, sensitivity synthesis, and publication bias. RESULTS: 45 articles were published between 2000 and 2022, and 2482 patients were finally included. All articles were observational research, with 7 case-control studies and 38 cohort studies, and the Newcastle Ottawa Scale (NOS) score ranged from 7 to 9. The pooled results suggested that age (OR 0.32, 95% CI 0.14-0.74, P = 0.01), reduction quality (OR 0.08, 95% CI 0.01-0.44, P = 0.00), fracture type (OR 0.44, 95% CI 0.25-0.78, P = 0.01), surgical approach (OR: 4.06, 95% CI 1.21-13.61, P = 0.02) and fixation implant (OR = 0.68, 95% CI = 0.34-1.33, P = 0.02) were risk factors for ONHH after IFPHF. According to sensitivity analysis, Begg (P = 0.42) and Egger (P = 0.68) tests, the results were stable and exhibited no publication bias. CONCLUSIONS: The study showed that age, reduction quality, fracture type, surgical approach and fixation implant were risk factors for ONHH after IFPHF, while gender, varus or valgus, timely operation, injured side, and the existence of medial support have little influence on ONHH, as they could not be considered risk factors and still need further investigations.

Humeral Head Reconstruction of Reverse Hill-Sachs Lesions.

Compared with anterior instability, posterior shoulder dislocations are a rare entity and are often missed at presentation. A concomitant anteromedial impression fracture of the humeral head, or a reverse Hill-Sachs lesion, is commonly present with these dislocations and is more pronounced with a longer timeline to reduction. Treatment of these defects ranges from nonsurgical treatment to soft-tissue procedures, bony reconstruction, and arthroplasty. Management may be dictated by various factors, such as patient demands, defect size and location, concomitant injuries, and underlying etiology. Small reverse Hill-Sachs defects without engagement can generally be treated nonsurgically or with benign neglect, whereas larger defects (>20%) often require surgery. The most reported surgical techniques are the (arthroscopic) McLaughlin and modified McLaughlin procedure, disimpaction and bone grafting, or reconstruction of the defect with autograft or with fresh (or fresh-frozen) osteochondral allograft. Finally, arthroplasty is generally required for large defects, where more than 45% to 50% of the articular cartilage is involved. Overall, reported outcomes generally reflect patient satisfaction for most patients, with a low incidence of secondary instability or posttraumatic arthritis, although better results are achieved when recognizing and treating these injuries in the more acute setting.

Does age affect patient outcomes after humeral head replacement in the treatment of acute proximal humeral fractures? A comparative cohort study with a minimum 10 years long-term follow-up.

BACKGROUND: Humeral head replacement (HHR) is now rarely recommended for complex proximal humeral fractures (PHFs) in older patients. However, in relatively young and active patients with unreconstructable complex PHFs, controversy still exists regarding the treatment options of reverse shoulder arthroplasty and HHR. The goal of this study was to compare the survival, functional, and radiographic outcomes of HHR in patients aged <70 years and those aged ≥70 years after a minimum 10 years follow-up. METHODS: Eighty-seven out of 135 patients undergoing primary HHR were enrolled and then divided into 2 groups based on age: <70 years and ≥70 years. Clinical and radiographic evaluations were performed with a minimum follow-up of 10 years. RESULTS: There were 64 patients (mean, 54.9 years) in the younger group and 23 patients (mean, 73.5 years) in the older group. The younger and older groups had comparable 10-year implant survivorship (98.4% vs. 91.3%). Patients aged ≥70 years had worse American Shoulder and Elbow Surgeons scores (74.2 vs. 81.0, P = .042) and lower satisfaction rates (12% vs. 64%, P < .001) than younger patients. At the final follow-up, older patients had worse forward flexion (117° vs. 129°, P = .047) and internal rotation (17 vs. 15, P = .036). More greater tuberosity complications (39% vs. 16%, P = .019), glenoid erosion (100% vs. 59%, P = .077), and humeral head superior migration (80% vs. 31%, P = .037) were also identified in patients aged ≥70 years. CONCLUSIONS: Unlike the increased risk for revision and functional deterioration over time after reverse shoulder arthroplasty for PHFs in younger patients, a high implant survival rate with lasting pain relief and stable functional outcomes could be observed in younger patients after HHR during long-term follow-up. Patients aged ≥70 years had worse clinical outcomes, lower patient satisfaction, more greater tuberosity complications, and more glenoid erosion and humeral head superior migration than those aged <70 years. HHR should not be recommended for the treatment of unreconstructable complex acute PHFs in older patient populations.

Radiographic comparison of eccentric stemmed vs. concentric stemless prosthetic humeral head positioning after anatomic total shoulder arthroplasty.

INTRODUCTION: Maintaining premorbid proximal humeral positioning is an essential consideration of anatomic total shoulder arthroplasty (aTSA), as malposition of the prosthetic humeral head can result in poor clinical outcomes. Stemless aTSA prosthetic heads are usually concentric, while stemmed aTSA prosthetic heads are typically eccentric in nature. Therefore, the purpose of this study was to compare the ability to restore native humeral head position between stemmed (eccentric) vs. stemless (concentric) aTSA. MATERIALS AND METHODS: Postoperative anteroposterior radiographs of 52 stemmed and 46 stemless aTSAs were analyzed. A best-fit circle was created using previously published and validated techniques to represent the premorbid humeral head position and axis of rotation. This circle was juxtaposed with another circle following the arc of the implant head. Next, the offset in center of rotation (COR), radius of curvature (RoC), and humeral head height above the greater tuberosity (HHH) were measured. Additionally, based on prior studies, an offset of >3 mm at any point between the implant head surface and premorbid best-fit circle was considered significant and further classified as overstuffed or understuffed. RESULTS: RoC deviation was significantly greater in the stemmed cohort than the stemless cohort (1.19 ± 1.37 mm vs. 0.65 ± 1.17 mm, P = .025). There was no statistically significant difference in deviation from premorbid humeral head between the stemmed and stemless cohorts for COR (3.20 ± 2.28 mm vs. 3.23 ± 2.09 mm, P = .800) or HHH (1.12 ± 3.27 mm vs. 0.92 ± 2.70 mm, P = .677). When comparing overstuffed implants to appropriately placed implants, there was a significant difference in overall COR deviation in stemmed implants (3.93 ± 2.51 mm vs. 1.92 ± 1.05 mm, P < .001). Superoinferior COR deviation (stemmed: 2.38 ± 3.01 mm vs. -0.61 ± 1.59 mm, P < .001; stemless: 2.70 ± 1.75 mm vs. -0.16 ± 1.87 mm, P < .001), mediolateral COR deviation (stemmed: 0.79 ± 2.65 mm vs. -0.62 ± 1.27 mm, P = .020; stemless: 0.40 ± 1.41 mm vs. -1.13 ± 1.96 mm, P = .020), and HHH (stemmed: 3.61 ± 2.73 mm vs. 0.50 ± 1.31 mm, P < .001; stemless: 3.98 ± 1.18 mm vs. 0.53 ± 1.41 mm, P < .001) were significantly different between overstuffed implants and appropriate implants in both the stemmed and stemless cohorts. DISCUSSION: Stemless and stemmed aTSA implants have similar rates of reproducing satisfactory postoperative humeral head COR with both producing COR deviation most commonly in the superomedial direction. Deviation in HHH contributes to overstuffing in both stemmed and stemless implants, COR deviation contributes to overstuffing in stemmed implants, while RoC (humeral head size) is not associated with overstuffing. Based on this study, it appears that neither eccentric nor concentric prosthetic heads are superior in recreating premorbid humeral head position.

Stemless reverse humeral component neck-shaft angle has an influence on initial fixation.

BACKGROUND: Stemless anatomic humeral components are commonly used and are an accepted alternative to traditional stemmed implants in patients with good bone quality. Presently, little literature exists on the design and implantation parameters that influence primary time-zero fixation of stemless reverse humeral implants. Accordingly, this finite element analysis study assessed the surgical implantation variable of neck-shaft angle, and its effect on the primary time-zero fixation of reversed stemless humeral implants. METHODS: Eight computed tomography-derived humeral finite element models were used to examine a generic stemless humeral implant at varying neck-shaft angles of 130°, 135°, 140°, 145°, and 150°. Four loading scenarios (30° shoulder abduction with neutral forearm rotation, 30° shoulder abduction with forearm supination, a head-height lifting motion, and a single-handed steering motion) were employed. Implantation inclinations were compared based on the maximum bone-implant interface distraction detected after loading. RESULTS: The implant-bone distraction was greatest in the 130° neck-shaft angle implantation cases. All implant loading scenarios elicited significantly lower micromotion magnitudes when neck-shaft angle was increased (P = .0001). With every 5° increase in neck-shaft angle, there was an average 17% reduction in bone-implant distraction. CONCLUSIONS: The neck-shaft angle of implantation for a stemless reverse humeral component is a modifiable parameter that appears to influence time-zero implant stability. Lower, more varus, neck-shaft angles increase bone-implant distractions with simulated activities of daily living. It is therefore suggested that humeral head osteotomies at a higher neck-shaft angle may be beneficial to maximize stemless humeral component stability.